Xylem WTW Cond 7310 Guia De Inicio Rapido página 4

English
Overview
Keypad
F1
F2
STO STO
RCL
AR AR
4
EN English
Cond 7310
The Cond 7310 meter enables you to perform measurements (conductivity)
quickly and reliably.
The Cond 7310 meter provides a maximum degree of operating comfort, reli-
ability and measuring certainty.
Keys are indicated by brackets <..>.
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec). A long keystroke (approx. 2 sec) is indicated by the underscore behind
the key symbol (e.g. <ENTER
<F1>: Situation dependent function (is shown on the display) e.g.:
_
<F1 >: <F1>/[Menu]: Opens the menu for measurement settings
<F2>: <F1
_
<F2 >:
<On/Off>: Switches the meter on or off
<M>: Selects the measured parameter
<CAL>: Calls up the calibration procedure
_
<CAL >: Displays the calibration data
<STO>: Saves a measured value manually
_
<STO > : Opens the menu for the automatic save function
<RCL>: Displays the manually stored measured values
_
<RCL >: Displays the automatically stored measured values
<><>: Menu control, navigation
<ENTER>: Opens the menu for measurement settings / confirms entries
_
<ENTER >: Opens the menu for system settings
<AR>: Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
_
>).
_
>/[Menu]: Opens the menu for system settings
Cond 7310
ba75934y02 05/2017