EINHELL TP-JST 18/135 Li BL Manual De Instrucciones página 11

or Rechargeable (Nickel Cadmium, Nickel
Metal Hydride, or Lithium-Ion) batteries.
6. Do not dispose of batteries in fi re.
7. Batteries should be recycled or disposed of
as per state, provincial and local guidelines.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fi res.
Special safety information Cordless jigsaw
•
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting
a live wire may make exposed metal parts
of the power tool "live" and could give the
operator an electric shock.
•
Use clamps or some other means to
fasten and secure the workpiece to a
sturdy surface. If you hold the workpiece
only with your hand or against your body it will
remain unstable and might cause you to lose
control.
•
Keep the tools in a safe place and out of the
reach of children.
•
When sawing, always wear safety goggles,
protective gloves and ear muffs; use a dust
mask on dusty jobs.
•
Always remove keys and wrenches after use.
Before switching on, make sure that all keys
and wrenches have been removed from the
tool.
•
Secure the workpiece to prevent it slipping
(clamp).
•
Use on materials containing asbestos is
prohibited.
•
Note the corresponding accident prevention
regulation issued by the professional
associations in your country.
•
Use only original replacement parts.
•
Repairs may only be carried out by a qualified
electrician.
•
The noise generated at the workplace may
exceed 85 db (A). The operator will require
noise protection measures and ear muffs if
this is the case.
•
Ensure that you maintain a steady foothold.
Avoid abnormal working postures.
•
Do not expose your electric tool to rain. Never
use electric tools in damp or wet locations or
near flammable liquids or gases.
•
Keep your work area tidy.
•
Wear suitable work clothes. Never wear loose
Anl_TP_JST_18_135_Li_BL_SPK7_USA.indb 11 Anl_TP_JST_18_135_Li_BL_SPK7_USA.indb 11
EN
fitting clothes and jewelry. Wear a hair net if
you have long hair.
•
For your own safety, use only accessories
and auxiliary equipment from the
manufacturer of your electric tool.
•
Use only saw blades that are sharp and
clean. Replace bent and cracked saw blades
immediately.
•
After you have switched off the saw, do
not slow down the saw blade by applying
pressure to its side.
•
Make sure that the feed speed is uniform,
as this will reduce the risk of accidents and
increase the service life of both the saw blade
and the saw.
•
Use only a damp cloth to clean your saw. Do
not use any aggressive agents for cleaning
purposes.
•
Check your saw to ensure that it is in good
working order. If the saw fails to work properly,
have it checked. Have all maintenance and
inspection work carried out only by a qualified
electrician.
SAVE THESE INSTRUCTIONS
2. Layout and items supplied
2.1 Layout
1. Handle
2. Speed selector
3. On/Off switch
4. LED lamp
5. Adapter for dust extraction system
6. Line guide
7. Adjustable soleplate
8. Selector switch for orbital action
9. Dial scale for soleplate
10. Guide roller
11. Edge guide
12. Saw blade (not supplied)
13. Lock knobs for edge guide
14. Blade holder
15. Safety guard
16. Hex. key
17. Splinter guard
18. Removable cover
19. Angle adapter for sawdust extraction
20. Battery capacity indicator
21. Battery capacity indicator button
- 11 -
08.12.2023 11:40:13 08.12.2023 11:40:13