voestalpine bohler welding TERRA NX 320 SMC Classic Manual De Instrucciones página 73

E33.1
E33.4
E43
E55
E57
E63
E65
E74
E99.3
E99.5
E99.11
9. TROUBLESHOOTING
The system fails to come on (green LED off)
Cause
» No mains voltage at the socket.
» Faulty plug or cable.
» Line fuse blown.
» Faulty on/off switch.
» Faulty electronics.
No output power the system does not weld
Cause
»
» The system has overheated (temperature alarm -
yellow LED on).
E33.3
E40
E54
E56
E62
E64
E71
E99.2
E99.4
E99.6
Solution
» Check and repair the electrical system as needed.
» Use qualified personnel only.
» Replace the faulty component.
» Contact the nearest service centre to have the system repaired.
» Replace the faulty component.
» Replace the faulty component.
» Contact the nearest service centre to have the system repaired.
» Contact the nearest service centre to have the system repaired.
Solution
» Replace the faulty component.
» Contact the nearest service centre to have the system repaired.
» Wait for the system to cool down without switching it off.
69
TROUBLESHOOTING
EN