Publicidad
Idiomas disponibles
Idiomas disponibles
Option 3. Multi Gang Wall Switch Box Installation
1
Remove the existing wall plate and old switch from the wall outlet box. (Fig. 3)
Connect the black lead wires from the switch in the cradle A to the black wires in the switch box. Hot input wire to one of the
2
switch leads. Power lead to the fan is connected to the remaining switch lead. (Fig. 4)
3
Attach the cradle A to the wall switch box using the supplied hardware.
Attach the multi-gang faceplate (not provided) to the switch set in the wall outlet box. Cradle A of Hinkley switch will fit in
4
standard decora face plate.
5
Remote transmitter will be held in place with built in magnets.
Outlet box
Switch
Fig. 3
HIRO Control System
Face plate
Fig. 4
Outlet box
Cradle A
cradle
any
Face plate
Transmitter
| hinkley.com |
©2023 Hinkley Lighting, Inc.
13
Publicidad
