RS Pro RS VP-4 Manual De Instrucciones página 2

Non-Contact AC Voltage Detector/English
1- WARNINGS
1-Read, understand and follow Safety Rules and Operating
Instructions in the manual before using this tester.
2-The tester's safety features may not protect the user if not
used in accordance with the manufacturer's instructions.
3-Check on a known live source within the rated AC voltage
range of the tester before use to ensure it is in working order.
4-Insulation type and thickness, distance from the voltage
source, shielded wires, and other factors may effect reliable
operation. Use other methods to verify live voltage, if there is
any uncertainty.
5-Do not use if the tester appears damaged or if it is not
operating properly. If in doubt, replace the tester.
6-Do not use on voltages that are higher than as marked on the
tester.
7-Use caution with voltages above 30 volts AC as a shock
hazard may exist.
8-Comply with all applicable safety codes. Use approved
personal protective equipment when working near live
electrical circuits-particularly with regard to arc-flash potential.
9-Do not operate tester if Low Battery warning occurs. Replace
batteries immediately
2- International Safety Symbols
Potential danger. Indicates the user must refer to the manual
for important safety information
Indicates hazardous voltages may be present
Equipment is protected by double or reinforced insulation
1