Parkside PAGG 4 A1 Traduccion Del Manual De Instrucciones Originale página 89

♦ Remove the spring and washer .
♦ Slide the washer and spring onto a new engraving tip
insert them and turn the engraving tip lock
working direction) to lock the tip in place .
♦ Ensure that the engraving tip
Working procedures
You can use the appliance to create imaginative and unique engrav-
ings . For example, you can permanently mark valuable items . You
can engrave numbers and letters onto metal, glass, wood, plastic,
ceramics, stone and leather . To do this, use the supplied engraving
templates .
♦ Hold the appliance at an angle, in the same way you would
hold a pen .
♦ Your arm should be resting on the table .
♦ Move the engraving tip
gentle pressure . To ascertain the ideal engraving speed, prac-
tice on a spare piece of material .
NOTE
► The supplied engraving tip
therefore not suitable for engraving electronic media such as
CDs, DVDs, etc . These materials and their readability could be
damaged .
■ 86 │ GB │ MT
is fixed correctly in place .
over the workpiece while applying
is made of tungsten steel . It is
. Then
clockwise (in
PAGG 4 A1