Publicidad
OLD PROTOCOL
1. Reset the Hood switching off the power for 60'' and then switch on again;
the Hood starts with "stand by".
2. Press the
Other buttons display white and are fixed. The display keep off.
3. Operate
for more than 2 seconds to confirm. The
for 5 seconds to return to the standby.
CODE
ALL
ALL
02010408
02010608
02010008
NEW PROTOCOL
1. Reset the Hood switching off the power for 60'' and then switch on
again; the Hood starts with "stand by".
2. Press
buttons start to flash white, the display keep off. The hood is in setting
mode.
3. Press the
buttons are fixed in white, and the display shows the FW number
previously set.
4. Select the FW through the
confirm. At this time, the
will return to the setting again (all buttons flash in white, and the display
keep off).
5. Let the Hood turn off and return to standby mode.
CODE
02010300
02010301
02010302
02010609
02010009
02010409
02010101
02010601
16
button between 5 or 10 seconds. The
or
button to select the FW. Then press the timing button
MODELS WITH OLD PROTOCOL SWITCH CONTROL
MODEL
TFH 6630 (FODA)
TFH 6630 (ETECH)
TFH 6430 BK /A
TFH 6430 X /A
TFH 6430 WH /A
and
for more than 3 seconds at the same time. When all the
button in the setting state, and will flashes red, the other
MODELS WITH NEW PROTOCOL SWITCH CONTROL
MODEL
TFH 6630 X /A
TFH 6630 WH /A
TFH 6630 BK /A
TFH 6430 X /B
TFH 6430 GWH /B
TFH 6430 GBK /B
TFH 6830 GWH /A
TFH 6830 X /A
button flashes red and is fixed
FIRST PRODUCTION
BEFORE 2022
button, and press the
button is fixed in red for 5 seconds, and then it
FIRST PRODUCTION
button flashes red.
FW
[
]
P
P
P
button again to
FW
2
2
2
8
8
8
7
7
Publicidad
