Method 2 - Power Supply Cord
IMPORTANT:
•
The power cord and connections must comply with the National
Electrical Code, Section 422 and/or local codes and ordinances.
Recommended cord length is 54" min. and 64" max.
•
A mating 3 prong, ground-type wall receptacle is required in a cabinet
next to the dishwasher opening.
•
A power cord kit part #BK500 is available for purchase from an
authorized parts dealer.
1/2
Drill a 1
1.
Optional locations are shown in the following graphic.
2.
Smooth edges of hole for power cord.
Wood Cabinet - Sand edges of hole until smooth.
Metal Cabinet - Cover edges of hole with grommet (not provided).
3.
Attach power cord to dishwasher before moving it into the opening.
See "Connect Power Supply" section for proper installation technique.
WARNING
18
PREPARE TO CONNECT WATER LINE
1/2
Drill a
1.
optional locations are shown in the following graphic.
" (3.8 cm) hole in the cabinet rear or side. Preferred and
b
a
Electrical Shock Hazard
•
Plug into a grounded 3 prong outlet.
•
Do not remove the ground prong from the power cord
plug.
•
Do not use an adapter.
•
Do not use an extension cord.
•
Failure to do so can result in death, fi e or electrical
shock.
" (1.3 cm) hole in the cabinet side, rear or floo . Preferred and
a
Preferred Locations
b
Optional Locations