Descargar Imprimir esta página

Klarstein SHIRAZ PREMIUM SMART Manual Del Usuario página 39

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CLEANING AND CARE
Cleaning the appliance
Switch off the appliance first and disconnect the power cord from the mains
socket.
Remove all the contents.
Wipe the inside with a damp cloth dipped in lukewarm water with a little
washing-up liquid.
Make sure the rubber seal on the door is clean so that the appliance remains
efficient.
The exterior of the wine refrigerator should be cleaned with a mild detergent.
Dry the inside and outside with a soft cloth.
Dust and anything else that clogs the exhaust vents will reduce the cooling
capacity of the appliance. If necessary, vacuum the exhaust air opening.
Decommissioning in the event of absence
First switch off the appliance. Then disconnect the power cord from the power
outlet.
Remove all the contents.
Clean the appliance.
Leave the lid on slightly to prevent condensation, mould or odours from
forming.
Installation at another location
First switch off the appliance. Unplug the power cord.
Remove all the contents.
Secure all loose items with tape.
Tape up the doors.
Energy saving recommendations
The wine refrigerator should be placed in the coolest place in the room, away from
appliances that generate heat, heating pipes and direct sunlight. Make sure that
the door is properly closed when the wine refrigerator is switched on.
EN
39

Publicidad

loading

Este manual también es adecuado para:

100453371004533810045339