3. Remove the drainpipe and insert it into the drainpipe support position of the base as shown in the
figure below. (Note that it must be clamped in place, the drainpipe must not be twisted or rubbed
against the ground)
As shown in the figure above, pinch the hose with your hand to avoid damage to the hose when
4. Re-right the washing machine. Check whether the drainpipe touches the ground.
5. Arrange the drainpipe. If the drainpipe is too long, shorten the drain pipe.
Placement of water drain hose:
If the water drain hose shall be extended, its length shall not exceed 3 meters, otherwise it will affect the
water discharging time.
EN
1 - The drain hose is embedded in the hose support.
embedding.