Publicidad
Idiomas disponibles
Idiomas disponibles
Preparation before washing.
1. Adjust the feet to make the washer be placed stable.
Adjustable foot (extend when clockwise rotating and shorten when counterclockwise rotating) (Slightly
incline the washer first and loosen the adjustable foot knob. Adjust the adjustable foot to ensure four
corners of washer be steadily contacted with the ground. Then tighten the adjustable foot knob and lock
it. If the ground is obviously not flat, correction should be made on the ground surface, otherwise the
washer barrel will incline and knock the cabinet).
2. Install the water inlet hose.
3. Connect to the power source.
4. Turn on the water supply.
5. Put down the drain hose.
EN
1 – For one inlet hose
2 – For two inlet hoses
Publicidad
