ulsonix LCLEAN MINI L Manual De Instrucciones página 29

LCLEAN MINI XL
1 – Water Level /Spin (Hold 3s): Press this button to set the water level of the program from 1-A. Hold the
button 3s to spin.
2 – Child Lock: Press the "Water Level" and "Program" at the same time to lock buttons on control panel,
press two buttons at the same time again to unlock buttons.
3 – Power: On & Off power
4 – Program/Delay (Hold 3s): Press this button can select frequently 12 programs, 01...12 are displayed in
the display window in turn. The program name corresponding to each program code is printed on the
panel. Hold 3s to Delay: Press the program button for 3s and the washing machine will enter the delay
state.
5 – START/Pause: Press the button to start after select the water level and program. press the button to
pause when the machine running.
Program Description
Drum clean: Used to clean the inner tube. Choose the "Drum Clean" program, the water level can't be
selected, and the program can't be selected after startup. The washing machine performs water intake,
rinsing, and spin according to the set program.
No drain: The washing machine runs to the end of the last rinsing process without draining water, waiting
for the user to treat the water. After the user presses the "Start/Pause" button, the washing machine
enters the drainage and dehydration process, and the user can recycle the water. If the user does not do
anything within the specified time, the washing machine will automatically power off. This function can be
selected only after the selected program or process includes rinsing and spin-drying or washing and
spinning processes.
Air dry: The air-dry program is further dehydration to reduce the moisture content of the clothes. Select
the "Air dry" program, the program, water level, and delay can't be selected. If there is water, drain and
spin first, and then continue spin until the end.
Child Lock: If this function is selected, all buttons are locked. If the top cover is opened after the washing
machine is started, the washing machine will stop working, beep an alarm, and the indicator light will
flash. If it closes within 5 seconds, the washing machine will automatically cancel the alarm and work
normally; if the door is not closed after 5 seconds, the washing machine will automatically drain water
while alarming until finished.
Program selection.
1. Press the POWER button.
2. Select the proper wate level and other attached functions.
3. Press the start/stop button.
EN