Publicidad
Idiomas disponibles
Idiomas disponibles
The placed height of water drain hose shall not exceed 10cm.
Do not bend the water drain hose and place it under the washer.
Installation of water inlet pipe
•
Put the water inlet pipe (which has metallic filtering bag) screw on to the tap.
•
Tightly screw another end of water inlet hose on water inlet valve. (with rubber seal ring inside). Note:
When tightening the clamping nut, evenly apply the force and do not twist the water inlet valve to avoid
breaking of water inlet valve joint.
EN
1 – Water inlet hose
2 – Clamping nut
Publicidad
