Delta Q Qool Evolution Manual De Instrucciones página 49

EN INSTRUCTIONS AND MODE OF USE
48
A. B.
A. B.
Programming the coffee extraction button.
Programming the coffee extraction button
Note: The pre-defined factory volume for the coffee extraction button is around 45cc.
• To alter the volume of your beverage, ensure the machine is ON, check whether there is
any water in the water tank and wait until the control panel buttons indicate
"Ready to use".
• Then press the coffee extraction button until the indicator lights of the espresso and the
long drinks extraction buttons start blinking. Press the coffee extraction button.
The indicator lights of the espresso and the long drinks extraction buttons go out.
Note: If the user does not press again the coffee extraction button after 1 minute, the
C.
equipment will revert automatically to the "Ready to use" mode.
• As soon as extraction has reached the desired dosage, press the coffee extraction button
C.
again and the operation is complete.
The equipment memorises this volume and will start extracting it until new
programming has been defined.
• After completing extraction, the equipment returns to "Ready to use" mode.
Note: If the user fails to press the extraction button to complete the operation,
the equipment will automatically assume the maximum volume around of 75cc.