A.
B.
A.
B.
Programming the long drinks extraction button.
Programming the long drinks extraction button
Note: The pre-defined factory volume for the long drinks extraction button is around
180cc.
• To alter the volume of your drink, ensure the machine is ON, check whether there is any
water in the water tank and wait until the control panel buttons indicate "Ready to use".
• Then press the long drinks extraction button until the indicator lights of the espresso
C.
and the coffee extraction buttons start blinking. Press the long drinks extraction button.
The indicator lights of the espresso and the coffee extraction buttons go out.
C.
Note: If the user does not press again the long drinks extraction button after 1 minute,
the equipment will revert automatically to the "Ready to use" mode.
• As soon as extraction has reached the desired dosage, press the long drinks extraction
button again and the operation is complete.
The equipment memorises this volume and will start extracting it until new
programming has been defined.
• After completing extraction, the equipment returns to "Ready to use" mode.
Note: If the user fails to press the extraction button to complete the operation, the
equipment will automatically assume the maximum volume of 200cc.
QOOL
49