Wiring Connection - JVC KD-AV41BT Manual De Instrucciones

Installation/Connection

Wiring connection

Audio output (Rear)
* Video is not output for
the video output terminal
when the source is
[Tuner] or [AUX].
Rear
Rear view camera input
Change the FUSE location to switch ACC
and B+ pin location on the ISO connector.
Fuse (15 A)
Video output *
Video Out
L
R
Camera In
Antenna terminal
D
E
Blue
POWER ANT/
REMOTE OUT
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
White ª / White/Black ·: To front speaker (left)
Gray ª / Gray/Black ·: To front speaker (right)
Green ª / Green/Black ·: To rear speaker (left)
Purple ª / Purple/Black ·: To rear speaker (right)
Light blue/Yellow
STEERING
WHEEL
REMOTE
CONTROL
Purple/White
REVERSE
GEAR
SIGNAL
Light Green
PARKING
BRAKE
Only for KD-AV41BT: Connect the microphone for Bluetooth (➜ 21).
Antenna cord
To the power control terminal when using an optional power amplifier, or to the antenna control
terminal in the vehicle (150 mA max)
To the metallic body or chassis of the car
20
To use the steering wheel remote control feature, an exclusive remote
adapter (not supplied) matching your car is required.
To reverse lamp (required when using a rear view camera)
To the vehicle's parking brake detection switch harness.
ACC
B+
Ignition switch
Car fuse box
Battery