Reolink TrackMix PoE Instrucciones De Operación página 4

Connection Diagram
Before using the camera, please connect your camera as instructed
below to fifinish initial setup.
1. Connect the camera to a Reolink NVR (not included) with an Ethernet
cable.
2. Connect the NVR to your router, and then power on the NVR.
NOTE: The camera should be powered with a 12V DC adapter or a PoE
powering device such as PoE injector, PoE switch or Reolink NVR
(not included in the package).
Power Adapter
Reolink NVR *
OFF ON
AUDIO
DC 48V OUT USB HDMI
* You may also connect the camera to a PoE switch or PoE injector.
5 English
Camera
Router
1 3 5 7
eSATA
VGA LAN 2 4 6 8
Ethernet Cable
Ethernet Cable
Set UP the Camera
Download and launch the Reolink App or Client software, and follow the
onscreen instructions to finish initial setup.
• On Smartphone
Scan to download
the Reolink App.
NOTE:
If you are connecting the PoE camera to a Reolink PoE NVR, please set
up the camera via the NVR interface.
English 6