Würth master AL 50-LI Traducción Del Manual De Instrucciones De Servicio Original página 11

OBJ_BUCH-0000000050-001.book Page 11 Thursday, November 10, 2011 11:49 AM
Maintenance and Cleaning
Once per week; more often in case of frequent usage:
• Keep the contacts in the slide-on shoe clean.
• Only dry-clean electrical contacts.
• Ensure that metal chips do not enter the battery-
charger housing.
When the battery charger's power cord is damaged, it
must be replaced by Würth or by an authorized Würth
Service Agent, in order to avoid hazardous situations.
If the battery charger should fail, despite the care taken
in manufacturing and testing procedures, repair should
be carried out by a Würth masterSERVICE.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the battery charger.
The current spare parts list for this power tool can be
viewed on the Internet at
"http://www.wuerth.com/partsmanager"
or requested from your next Würth branch office.
Guarantee
For this Würth battery charger, we provide a guaran-
tee in accordance with the legal/country-specific regu-
lations from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will be
corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the battery charger is
sent undisassembled to a Würth branch office, your
Würth sales representative or an authorised customer
service agent for Würth compressed-air and power
tools.
Disposal
Packaging, worn out battery chargers and accessories
should be sorted for environment-friendly recycling.
Dispose of batteries only when discharged.
For batteries that are not completely discharged, insu-
late the terminals with tape as a protective measure
against short-circuiting.
Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards:
EN 60335, EN 55014, EN 61000-3-2,
EN 61000-3-3 in accordance with the Directives
2006/95/EG, 2004/108/EG.
Technical file at:
Adolf Würth GmbH & Co. KG, Abt. PFW
74650 Künzelsau
T. Klenk A. Kräutle
General Manager General Manager
Künzelsau: 21.07.2011
Subject to change without notice.
11