Vapormed MIGHTY MEDIC Modo De Empleo página 86

Warning! Isopropyl Alcohol
is flammable and may easily
ignite.
The safety instructions fur-
nished by the manufacturer
of the isopropyl alcohol
must be observed!
Do not immerse plastic parts
in isopropyl alcohol for more
than half an hour. Prolonged
contact with isopropyl alcohol can
lead to color changes or embrittle-
ment of the plastic parts. The Herb
Mill, Filling Aid and Magazin must not
be placed in isopropyl alcohol.
8.6. Inspecting/Maintenance of the
Cooling Unit with Mouthpiece
After cleaning, check all component
parts of the Cooling Unit with Mouth-
piece for surface damage, tears, sof-
tening or hardening, soiling, discol-
oration, or excessive limescale and
discard a damaged Cooling Unit or
Mouthpiece.
Then reassemble the Cooling Unit with
Mouthpiece (see Chapter 9. "Disas-
sembly and Assembly of the MIGHT Y
MEDIC Cooling Unit", page 87).
8. H Y G I E N E
8.7. Reusability of the Cooling Unit
with Mouthpiece
The Cooling Unit with Mouthpiece is
intended for multiple use and should
only be used by one person.
The Cooling Unit with Mouthpiece
must be cleaned:
If there is visible residue on the
inside of the Cooling Unit with
Mouthpiece.
At the latest 7 days after the last
cleaning.
Before every use, check the Cooling
Unit with Mouthpiece for damage and
wear and tear. A defective Cooling Unit
with Mouthpiece must be replaced im-
mediately.
i
8.8. Storage
Store Cooling Unit with Mouthpiece in
a dry, dust-free place away from con-
tamination.
86
Sets of new Cooling Units with
Mouthpiece may be ordered
from www.vapormed.com.