Vapormed MIGHTY MEDIC Modo De Empleo página 90

10. T H E M I G H T Y M E D I C VA P O R I Z E R
10.3. Troubleshooting
If the device does not function properly
when the power adapter is connected
to the power socket, please check the
MIGHT Y MEDIC Vaporizer using the
tips in the following table:
Problem
MIGHT Y MEDIC cannot
be switched on.
The display of the
MIGHT Y MEDIC shows:
ERR 001.
The display of the
MIGHT Y MEDIC shows:
ERR 002.
The display of the
MIGHT Y MEDIC shows:
ERR 003.
The display of the
MIGHT Y MEDIC shows:
ERR 004.
Possible Cause / Remedy
Please ensure that the MIGHT Y MEDIC's battery is
charged or the Vaporizer is connected via the power
adapter to a functioning mains socket.
If the Vaporizer still does not work, then the device
is faulty. In this case, disconnect from the mains
without delay and get in touch immediately with our
Service Center.
Battery temperature is too high. Allow the Vaporizer
to cool down.
Battery temperature is too low. Warm up the Vapor-
izer.
The power adapter is not suitable. Please use an
original Storz & Bickel power adapter.
The Vaporizer is faulty. In this case, disconnect from
the mains without delay and get in touch immedi-
ately with our Service Center.
90