PawHut D00-144 Manual Del Usuario página 4

PET TRAILER PARTS INCLUDED IN THE BOX
A. trailer body with tow bar ×1
B. front wheel ×2
C. handelbar ×1
D. flag ×1
E. rear wheel ×2
MAIN FRAME AND SIDE PANEL ASSEMBLY
Remove the trailer and all components from carton. While the trailer is still in folded
position, lift both side panels to an upright position.
Place the cross bar into the plastic cross bar catch at the bottom of the side panel.
Be sure to line up the holes in the crossbar with the holes in the catch to allow the
spring clip to be installed. Insert spring chip that is on the strap attached to the side
panel. Lock safety pin as shown in the illustrations below.
The trailer provides one inner D-rings for safety retain.
EN