CAUTIONS
Warning
Before using the instrument, please read this manual careful-
ly for proper operation.
Please read this manual before the first use.
Please wear goggles when working and be careful not to
splash brake fluid into your eyes.
Do not perform the test without sufficient liquid in the beaker.
(the test stick can be damaged by empty boiling)
Do not touch to avoid burns after the test, as the test stick and
liquid are at high temperature.
Do not pour the brake fluid back into the reservoir as the struc-
ture of the fluid has been damaged and the boiling point has
been lowered, otherwise, it will affect driving safety.
After the test, please empty the brake fluid and fill another
50ml of water to test the boiling point in order to clean the
residual brake fluid of the test stick.
If the same brake fluid sample is tested continuously and the
data varies, this is normal because the test sample has been
boiled and the structure has changed.
This equipment is designed for brake fluid detection and is not
responsible for any product damage or property damage
caused by its use for other purposes.
This equipment requires a professional technician or trained
service personnel. Please do not touch or use this equipment
with non-automotive technicians or by children.
Please read this manual carefully before using the product for the
first time and refer to the following documents to assist in diagno-
sis.
Vehicle Original Service Manual.
Related technical bulletins.
The Material Safety Data Sheet (MSDS) provided by brake
fluid manufacturer. Please put the relevant documents in the
portable box of this device for easy checking at any time.