Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT INTRODUCTION
Product
parameters
Features
Maintenance
and Calibra-
tion
Applicable brake
fluid types
Wet boiling point range
Dry boiling point range
Working voltage
Detection time
Working temperature
range
●
Battery polarity reverse protection
●
The screen will prompt the operation, which is clear and easy.
Suitable for detecting different types of brake fluid. The
●
minimum boiling point of brake fluid can be obtained quickly
and accurately, and the official dry and wet boiling point values
are also available as a reference.
●
No need to use consumable test sticks to save costs.
●
Maintenance
When it is not in use for a long time, please detect it with water,
so that the corrosive brake fluid can be removed vertically from
the test stick and dilute the corrosiveness, and then leave the
heating stick to dry in the air at room temperature.
Calibration
●
Fill the beaker with water and test if the boiling point is at 100
°C (212 °F) ± 3 %, and make a quick initial diagnosis of whether
the tool is working properly. If more rigorous standards are
required, it must be returned to the factory for re-testing and
calibration.
DOT3, DOT4, DOT4+, DOT4ESP,
DOT5, DOT5.1, DOT5.1ESP,
140~205°C (284~401°F) ±5%
160~320°C (320~608°F) ±5%
12V, minimum 10V
2
ENV4, ENV6
16 seconds
0~50°C
Publicidad
