Descargar Imprimir esta página

Makita DMP180SYX Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

5.
Turn on the tool, and then set the appropriate
pressure value using the pressure gauge.
NOTICE:
When inflating a floating tube, the
pressure gauge will not display an accurate value
since the pressure of floating tube is less than 20
kPa (3 PSI). When inflating a floating tube, do not
use the value on the pressure gauge, but inflate it
by checking the status of the floating tube.
6.
Keep pulling the switch trigger until the tool stops.
The item is inflated with the specified pressure.
Using the English valve adapter
Country specific
1.
Unfold the air chuck clamp.
2.
Insert the English valve adapter into the air chuck.
3.
Fold the air chuck clamp firmly.
1
2
► 1. English valve adapter 2. Air chuck 3. Air chuck
clamp 4. Valve stem
4.
Attach the English valve adapter to the valve stem
while opening the English valve adapter.
5.
Turn on the tool.
6.
Inflate the tire by pulling the switch trigger while
checking the status of the tire.
NOTICE:
When using the English valve adapter,
the pressure gauge will not display an accurate
value due to characteristics of the valve. When
inflating a tire, do not use the value on the pres-
sure gauge, but inflate it by checking the status
of the tire.
If the tool stops before the tire reaches the
desired air pressure, adjust the pressure value,
and then inflate the tire again.
4
MAINTENANCE
CAUTION:
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
3
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
9 ENGLISH
Always be sure that the tool is

Publicidad

loading

Este manual también es adecuado para:

Dmp180