Virutex SC710 Manual De Instrucciones página 11

• Beware of shavings that fly off. Hold the tool that
so that sparks fly away from you or other people and
inflammable materials.
• Do not exert excessive pressure on the base since
this serves as a support and doing so will merely brake
the saw feed.
• If thin sheets are to be cut, we recommend supporting
them on a wooden base to avoid vibration of the sheet
and accidents.
• Ensure that the base plate is totally supported by the
work surface before beginning work.
• The cutting path must be free from any obstacles,
both above and below.
• In no case turn the machine on with the saw blade in
contact with the material, since this places undue strain
on the blade. Insert the saw blade when the machine
has reached the selected speed.
• A protective face mask must be employed in any work
producing harmful dust. Material containing asbestos
must not be worked.
• When working with the machine, always wear safety
goggles and ear protection. Other personal protection
equipment such as dust masks, gloves, helmet and apron
should be worn when necessary, along with non-slip
safety footwear. If in doubt, use safety equipment.
• Never place hands or fingers in front of the saw when
working.
• Make sure the vents are free when working with dust.
If they require cleaning, first unplug the machine, do
not use metal objects and avoid damaging internal parts.
• When the work is finished, the equipment should be
switched off and the saw blade must be allowed to come
to a complete stop before removing it from the cutting
slot and depositing it (danger of kick-back).
Power tools can produces an electromagnetic
field during operation. This field may under
some circumstances interfere with active or
passive medical implants. To reduce the risk
of serious or fatal injury, we recommend
persons with medical implants to consult
their physician and the medical implant ma-
nufacturer before operating this power tool.
Reducing dust exposure
The chemical substances contained in dust
generated in sanding, cutting, sawing, grin-
ding, drilling and other construction industry
activities may result in cancer, congenital
deficiency or be harmful to the fertility.
If you work with chemicals take into account:
• The transparent two silicon oxide and other masonry
products in the wall bricks and cement; the chromium
arsenic (CCA) in wood with chemical treatment. The harm
degree of these substances shall depend on the frequent
degree of you carrying out these works. If you want to
reduce the contact with these chemical substances,
please work in the place with ventilation and you shall
use the appliances with safety certificates (such as the
dust mask designed with tiny dust filter).
2. SPECIFICATIONS
Universal motor..........................................230V 50/60 Hz
Power..............................................................710 W
Strokes per minute.......................................700-3000/min
Stroke Length...............................................................26 mm
Pendular movement..........................................................Yes
Angle capacity of base (left and right).......................45º/45°
Variable speed..........................................................Yes
Quick fixing system.............................................................Yes
Wood cutting capacity..............................................85 mm
Aluminium cutting capacity......................................20 mm
Steel cutting capacity....................................................10 mm
Weight..........................................................................2,9 kg
Weighted equivalent continuous acoustic
pressure level A.......................................................88,5 dBA
Acoustic power level A...........................................99,6 dBA
Wear ear protection!
Vibration total values..............................................a
3. COMPONENTS
1. On/Off Switch
2. Lock Button
3. Ventilation Slots
4. Stroke Speed Selection Wheel
5. Protective Cover
6. Contact Guard
7. Guide Roller
8. Wing Screw
9. Saw Support
10. Pendulum Stroke Adjustment Lever
11. Base Plate
12. Scale
13. Locking Lever
14. Pointer
15. Saw Blade*
16. Allen Key
17. Positioning Pin
18. Guide Bar for Circular / Parallel Cutting
19. Suction Nozzle
*Not included
4. STANDARD ACCESSORIES
• SC710 Machine
• Delicate Surfaces Protector
• Allen Key
: 5,42 m/s
2
h
11