Uline Kihlberg H-1440 Manual De Instrucciones página 2

STAPLE PENETRATION DEPTH
Push knob in and turn to the desired position:
(See Figure 1)
– For shallow stapling
= For deep stapling
STAPLE LEG LENGTH
Stapler adapts to use of 15 or 18 mm staples.
1. Loosen the locking screw underneath with
2.5 mm Allen wrench. (See Figure 2)
2. Set desired staple leg length. Tighten the locking
screw. (See Figure 3)
Figure 2
STAPLE CLOSURE
For a tighter staple closure:
Turn the adjusting nut to the
left. (See Figure 4)
For a looser staple closure:
Turn the adjusting nut to the
right. (See Figure 4)
PAGE 2 OF 9
OPERATION CONTINUED
Figure 1
18 mm 15 mm
Figure 3
Figure 4
LOADING
1. Pull and lock pusher to rear of magazine.
(See Figure 5)
2. Insert two sticks of staples into the magazine.
(See Figure 6)
3. Lift latch to release pusher. Ease pusher forward
until contact is made with staples in magazine.
(See Figure 7)
Figure 5
Pusher
Figure 6
Figure 7
0424 IH-1440