Descargar Imprimir esta página

höfats SPIN 1500 Instrucciones De Uso página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
spirit or petroleum.
• Only use Bio-Burners from höfats.
• If you notice damage such as rust or
deformation on the Bio-Burner, stop using
it and dispose of it immediately.
WARNING!
Danger of poisoning for children!
Children can drink or swallow the liquid fuel.
Due to the lack of colour, there is a risk of
confusion with water.
• Keep liquid fuel out of the reach of children!
Be sure to also read the instructions on the
fuel container!
CAUTION!
Danger of burns from hot surfaces!
During operation, parts of the SPIN become
very hot and can cause burns!
Never transport the SPIN during
operation or when the glass cylinder is still
hot. Wait for the SPIN to cool down before
transporting.
• Allow the SPIN to cool completely before
disassembling, converting or storing.
• Wear grill gloves when handling the hot
SPIN to avoid burns.
Danger of stumbling when setting up
The SPIN can present a tripping hazard
when placed in areas where people are
standing or walking. Personal injury or
damage to the SPIN may result.
• Only place the SPIN in areas where it is
easily visible and out of the way of people.
Particular care should be taken when
setting up in the dark.
• Do not place the SPIN in doorways,
corridors, or other pathways where people
walk.
NOTES ON ROOM SIZE
Permitted room sizes when operating 1 SPIN 1500:
Room area
(ceiling height
approx. 2.30 m)
21 m²
14 m²
7 m²
PUTTING THE SPIN INTO OPERATION
Unpack and check the scope of delivery
• Remove all packaging material from the SPIN.
• After unpacking, as before each use, check whether the SPIN
components show signs of damage. If this is the case, do not
use the SPIN, and notify your retailer or contact höfats directly.
• Assemble your SPIN as shown in the quick start guide and
described in the following chapters.
WARNING!
Danger of suffocation from packaging film
and plastic parts!
Do not let children play with packaging
materials! There is a risk of suffocation!
Assembling the SPIN
You can find an illustration of the assembly
and the scope of delivery in the SPIN quick
guide.
EN

Publicidad

loading