EN
26
•
Weekly timer: The weekly timer allows four cycles of operation per day and
seven days in a week. "Week timer" will appear on the display. Press settings
(16) on the remote control to bring up a day. The display (6) flashes. Using
the arrow buttons (13, 14), select the first operating cycle. Go to settings (16)
to choose a start time then select the start time with the arrow keys. Use the
settings button (16) again to set a switch-off time. Proceed in the same way to
set other days of the week and operating cycles.
Program termination
To erase all previous settings (daily timer or weekly timer), press and hold the
button (16) for 10 seconds.
Backlight
In heating mode, press the OK button on the remote control. The background
glows in different colours. Every time you press the button the colours will change.
There are 6 colours in total. After going through the last colour, press OK to turn
off the backlight.
Switching off the device
To switch off, press the on/off switch. The device will then cease to operate. The
device will switch off.
CLEANING AND CARE
Note: Switch off the appliance and remove the plug from the socket. Wait until
the appliance has cooled down completely before cleaning it.
•
Use a cleaner to clean the ventilation slots and grilles.
•
Remove dust from the exterior surfaces with a damp (not wet) cloth.
•
Do not use harsh cleaning agents or abrasive cleaners.
•
Do not spray or immerse the device in water or any other liquid.
•
Never open the heater housing.