Miele HS19 Instrucciones De Manejo página 88

en
Problem
The roller brush is not
rotating.
The Electrobrush
switches itself off.
88
Cause and remedy
The roller brush that has been fitted is not the ideal
choice for the type of flooring.
 Select a lower power level (see "Use – Selecting
the suction power level").
 Insert the grey Carpet Care roller brush (see "Us-
ing the accessories supplied – Carpet Care roller
brush").
The roller brush is dirty.
 Clean the roller brush (see "Maintenance – Clean-
ing the Electrobrush" and "Removing the roller
brush from the Electrobrush").
The Electrobrush is overloaded – this can happen on
surfaces like deep-pile carpet.
 Switch the vacuum cleaner off and switch it on
again at a reduced suction power level. Use the
On/Off switch on the Comfort handle to do this.