Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS (Continued)
5.
From underneath the sink, secure the faucet body (A) to the sink
using the rubber washer (AA), metal washer (BB), and lock nut
(CC). Tighten the lock nut by using the hex bolts (DD).
Hardware used
Rubber washer
AA
Metal washer
BB
Lock nut
CC
Hex bolts
DD
6.
Remove the old pop-up drain assembly. Clean all sink surfaces to
remove old putty and dirt before installing the new drain assembly.
To install the pop-up drain, remove the bottom drain gasket (EE)
and drain mounting nut (FF) from the pop-up drain (D). Push the
bottom drain gasket (EE) down onto the top of the drain mounting
nut (FF) and twist to attach together.
7.
Insert the pop-up drain (D) into the drain hole in the sink (7.1).
Ensure the top gasket (7.2) rests securely between the top of the
sink and the top of the pop-up drain (D).
8.
From underneath the sink, thread the bottom drain gasket (EE)
and drain mounting nut (FF) onto the pop-up drain (D) by twisting
clockwise until secure against the bottom of the sink.
x 1
x 1
x 1
x 2
5
5
AA
BB
CC
DD
DD
6
D
EE
FF
7
7.2
7.1
D
8
D
FF
A
EE
Publicidad
