Profi Cook PC-ES-KA 1266 Manual De Instrucciones página 16

milk. Depending on taste, it can be drunk sweetened or
unsweetened.
• The choice of variety is a matter of personal preference.
Espresso beans are either blends (mixtures of different
varieties from different regions for a consistent taste)
or single variety beans from one growing region (single
origin).
• In blends, a proportion of Robusta (20 to 30 %) is often
added to the Arabica beans. With a high proportion
of Robusta, it is easier to obtain a good crema during
preparation.
Tips and Tricks for Perfect Coffee Enjoyment
For a successful espresso preparation, it is important to
consider a few things:
• The espresso machine must be preheated to operating
temperature.
• Preheat the cups with hot water. Place the cups on the
warm warming plate until use. Thick-walled porcelain
cups hold the heat well.
• Only use espresso beans. It is ideal to grind the es-
presso beans just before preparation. Coffee that has
already been ground quickly loses its aroma.
• The coffee grounds should be ground finely, but not too
finely. If ground too coarsely, the finished espresso lacks
aroma; if ground too finely, it tastes bitter.
Try different varieties until you find your taste.
• Compaction of the Coffee Grounds:
Depending on how firmly the ground coffee has been
pressed into the filter insert, the espresso results
(espresso quantity and crema) may vary. It is therefore
important to distribute and press the ground coffee prop-
erly in the filter insert so that the water can flow through
evenly at all points.
- The filter insert must be dry before the ground coffee
is poured in.
- Use the tamper provided to press on the coffee
grounds. Do not press too hard or too lightly.
- The pressed coffee grounds must have a flat surface.
- Press, do not turn! Turning while pressing loosens up
the "coffee cake" again. Press straight down and from
above on the coffee grounds.
To find the ideal "espresso experience" for you, we
recommend experimenting with the amount of coffee
grounds and how you press the coffee grounds down.
Use of the Capsule Adapter
The appliance can only be operated with Nespresso-com-
patible capsules!
• Different brands of Nespresso-compatible capsules are
available in the shops. There are different types of cap-
sules from brand to brand and also within brands, which
produce different results due to different manufacturing.
This is not a defect of the appliance.
16
PC-ES-KA1266_IM_01.2024
• The different roasts, from light to strong, can affect the
amount and flow of coffee. A slight drip is normal.
Operation
Assembly / Disassembly of the Filter Holder
• To fit the filter holder to the brew head, hold it with the
handle on the left edge of the appliance.
1. The handle of the filter holder must be slightly behind
the open lock symbol (
2. Insert the guide lugs of the filter holder into the
recesses of the brewing head.
3. Pull the filter holder by the handle to the right until it
reaches the centre of the appliance ( LOCK ). Make
sure that the filter holder is firmly seated in the brew
head.
• To detach the filter holder from the brew head, pull it to
the left.
WARNING: Risk of Burns!
After the brewing process, the metal parts of the filter
holder and the filter insert are hot.
Inserting the Collection Container / Drip Grid
1. Insert the collection container for the residual water.
2. Place the drip grid on top of the collection container as
a cover.
Adjusting the Length of the Milk Nozzle
The length of the milk nozzle can be adjusted
so that it protrudes into the cup opening to
prevent splashes. Depending on the size of
the cup, the position of the milk nozzle must be
adjusted as follows:
1. Turn the attached stainless steel attach-
ment for the milk nozzle a short turn to
the left.
2. Slide the stainless steel attachment into the
desired position (top, centre or bottom).
3. Now turn the stainless steel attachment a short turn to
the right again.
Removing and Filling the Water Tank
• Pull the water tank upwards with both hands.
- It is normal for there to be water under the water tank.
This must be removed regularly with a clean sponge.
• Fill the water tank with clean, fresh water. The water level
must be between the MIN and MAX markings.
• When reinserting the water tank, make sure that it is
seated in the holder on the appliance. Then press it
down gently so that the valve opens.
• The water tank can also be filled without removing it
first. Open the lid and fill the water into the water tank
with a jug.
INSERT ).
03.01.24