Publicidad
Idiomas disponibles
Idiomas disponibles
6.3 Self learning transmitter
fu
su
d l
6.4 Adding or changing transmitters.
Su
Su
- -
6.5 Closing force adjustments
P1
P2
f9
f1
f5
6.3.1 When the unit has stored 20 codes, it ashes "Fu", or
preventing coding mistakes, it is necessary to cancel all the
stored codes.
6.3.2 Press and hold CODE, it displays "Su".
6.3.3 Hold more than 8 seconds, it ashes "dL", all the codes
were cancelled.
6.4.1 Press CODE, it displays "Su".
6.4.2 Press a button on the transmitter, then release and press
the same button again, "Su" ashes.
6.4.3 Then it displays "- -" to show settings is complete. Repeat
up steps to code a maximum of 20 di erent transmitters
and/or buttons.
6.5.1 Press and hold SET, it displays "P1".
6.5.2 Press UP once, it displays "P2".
6.5.3 Press SET once again; it will show the current situation. Press UP
to increase the force one degree or press DOWN to decrease one
degree. Maximum degree is "F9", minimum is "F1".
6.5.4 Press SET to con rm. The default setting is "F5".
6.5.5 After nishing all the setting, please check the force to
make safe.
7
Code: SC1800
Publicidad
