Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
REMOVING CARTON CONTENTS
WARNING
Do not attempt to operate this product if any items in
the INCLUDED LIST are already assembled when
you remove the carton contents. These items are not
assembled by the manufacturer and should require
customer assembly. Using an improperly assembled
product can be hazardous and could result in serious
personal injury.
z Carefully open the carton.
z Remove and inspect the carton contents. Verify that all the
items in the INCLUDED LIST are present and undamaged.
z Recycle or dispose of the packaging materials properly.
INCLUDED LIST
See Figure 4.
Snow blower, chute connecting rods and cotter pins (2 ea.),
unclogging tool (1), quick start guide, and user manual.
If any parts are missing, contact our service team at
service@wpowereq.com or call 1-855-944-3571.
TOOLS NEEDED
(not included)
Needle-nose pliers.
WARNING
uct unless instructed otherwise in this manual or by the
manufacturer. Do not use attachments or accessories
that are not recommended for use with this product.
Making unauthorized modifications and using incom-
patible accessories can damage the unit and may void
your warranty.
WARNING
until assembly is complete. Failure to comply could
result in accidental starting and possible serious per-
sonal injury.
RAISING THE HANDLE ASSEMBLY
See Figures 5 - 6.
This unit ships with its handle fully assembled and in a folded
position. The following steps explain how to raise the handle
into a secure and locked position.
z Raise the upper handle in the direction as shown by the
arrow until the tubes align and slide into the indent of the
lower tube.
z Tighten the upper handle locking knobs. Do not overtighten.
This product requires assembly.
Do not alter or modify this prod-
Do not connect to power supply
FIG. 4
A - Snow blower
B - Upper and lower connecting rods
C - Cotter pins
D - Unclogging tool (1)
NOT SHOWN
User manual
FIG. 5
A - Upper handle
B - Upper handle lock knobs
|
English
9
A
C
B
B
D
A
Publicidad
