Operating Basics; Overview; Switching Power On/ Off - Kenwood TK-2170 Manual De Instrucciones

O
VERVIEW
Your dealer can program your transceiver with Conventional
zones. (TK-3173 transceivers can be programmed with
Trunking zones and Conventional Zones.) The transceiver
can handle up to 128 zones with up to 128 channels/ 250
group IDs. Zones, channels/ group IDs, and their functions
are programmed by your dealer.
S P
WITCHING OWER
Turn the Power switch/ Volume control clockwise to switch
the transceiver ON.
• A beep sounds and the display momentarily lights up.
• If the Transceiver Password function is programmed,
"
password to unlock the transceiver. Refer to "Transceiver
Password", below.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver OFF.
■
T
RANSCEIVER
To enter the password without using the DTMF keypad:
1 Rotate the selector to select a digit.
2 Press the C> key to accept the entered digit and move
to the next digit.
• Press the A key to delete an incorrect character. Press
and hold the A key to delete all entered characters.
3 Repeat steps 1 and 2 to enter the entire password.
4 Press the S key to confirm the password.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
16

OPERATING BASICS

ON/ OFF
" appears on the display. You must enter the
P
ASSWORD