Conventional Zones; Transmitting; Receiving; Quiet Talk (Qt)/ Digital Quiet Talk (Dqt) - Kenwood TK-2170 Manual De Instrucciones

T
RANSMITTING
1 Select the desired zone and channel using the selector
and the Zone or CH/GID keys.
2 Press the key programmed as Monitor or Squelch Off to
check whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.
• For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from your
mouth.
R
ECEIVING
1 Select the desired zone and channel using the selector
and the Zone or CH/GID keys.
• Alternatively, you can turn the Scan function on if desired.
2 When you hear a caller's voice, readjust the volume as
necessary.
Q T (QT)/ D
UIET ALK
Your dealer may have programmed QT or DQT signaling on
your transceiver channels. A QT tone/ DQT code is a
sub-audible tone/code which allows you to ignore (not hear)
calls from other parties who are using the same channel.
When a channel is set up with a QT tone or DQT code,
squelch will only open when a call containing a matching tone
or code is received. If a call containing a different tone or
code is made on the channel you are using, squelch will not
open and you will not hear the call.
Although it may seem like you have your own private channel
while using QT/ DQT, other parties can still hear your calls if
their transceiver is set up with the same tone or code.
20

CONVENTIONAL ZONES

Q
IGITAL UIET
T (DQT)
ALK