Publicidad
Idiomas disponibles
Idiomas disponibles
T-blade
Cleaning brush
Blade guard
Lubricating oil
Screwdriver
Zero-gap tool
FX787N IB-18020A.indd 13-14
FX787N IB-18020A.indd 13-14
Trimmer
PRODUCT FEATURES
1. Zero-Gap T-Blade
2. Brushless Motor — 7200 rpm
3. LED charge indicator light
a. Blinking Blue – Charging
b. Solid Blue – Fully Charged
c. Flashing Blue – 10 minutes of battery left
USB-C Cable
USB Adapter
Read these instructions carefully before connecting the unit to any power supply.
Plug the unit into a standard electrical outlet (using a power adapter) or into a
certified USB power source (using a USB-C cable).
Use with adapter model no.: CA78M (C045120-A) (not included)
Rated input voltage: 100-240V ~, 50/60Hz, 0.2A
Rated output: 4.5V DC, 1200mA
OR
Use with USB-C cable and USB adapter CA88M (included), or a certified USB power
source.
Rated input voltage: 100-240V ~, 50/60Hz, 0.5A
Rated output: 5.0V DC, 2000mA
OPERATION
1. For dry location use only. Do not expose to water.
2. When not in use, unplug unit completely.
3. Unit will become warm during operation.
CAUTION
1. Dry location use only. Do not expose to liquids, vapor, or rain.
2. Ensure power cord is plugged into the trimmer before plugging the adapter into the
outlet.
3. Do not operate any appliance that has a damaged cord or housing.
4. Always unplug the unit before cleaning or when not in use.
5. Be sure voltage is correct before plugging in. For connection to power supply not in
the U.S.A., use an attachment plug adapter of the proper configuration for power
outlet. The adapter automatically adjusts to the input voltage. DO NOT USE A VOLTAGE
CONVERTER.
TRIMMER CHARGING PRECAUTIONS
• Avoid charging the battery at temperatures below 41°F (5°C) or above 95°F (35°C).
• Avoid charging the battery in direct sunlight or near a radiating heat source.
2023/11/1 15:18
2023/11/1 15:18
Publicidad
