Briggs & Stratton SNAPPER G1000 Manual Del Propietário página 2

S 4PPER
TM
bye& Sfrafton °
_ Power P_oDu_s
TABLE OF CONTENTS
Safety Rules .................................... 2-4
Know Your Generator ............................ 5
Assembly ....................................... 6
Operation .................................... 7-12
Specifications ................................... 3
Maintenance .................................... 3
Storage ........................................ 4
Troubleshooting ................................. 5
Notes ......................................... 6
Warranty ...................................... 7
EQUIPMENT
DESCRiPTiON
_ Read this manual carefully and become
familiar with your generator. Know its
applications, its limitations and any hazards
involved.
The generators are an engine-driven, revolving field,
alternating current (AC) generator It was designed to
supply electrical power for operating compatible electrical
lighting, appliances, tools and motor loads The generator's
revolving field is driven at about 3,600 rpm by a single=
cylinder engine
CAUTION! DO NOT exceed the generator's
wattage/amperage capacity See "Don't Overload
Generator"
Every effort has been made to ensure that information in
this manual is accurate and current However, we reserve
the right to change, alter or otherwise improve the
product and this document at any time without prior
notice
The Emission Control System for this generator is
warranted for standards set by the Environmental
Protection Agency For warranty information refer to the
engine owner's manual.
Copyright
© 2005 Briggs & Stratton
Power Products
Group, LLC All rights reserved No part of this material
may be reproduced or transmitted in any form by any
means without the express written permission of Briggs &
Stratton Power Products Group, LLC
SAFETY RULES
_k his is the safety alert symbol. It is used to
alert you to potential personal injury
hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
The safety alert symbol (_) is used with a signal word
(DANGER, CAUTION, WARNING), a pictorial and/or a
safety message to alert you to hazards DANGER
indicates a hazard which, if not avoided, will result in death
or serious injury WARNING indicates a hazard which, if
not avoided, could result in death or serious injury
CAUTION indicates a hazard which, if not avoided, might
result in minor or moderate injury CAUTION when
used without the alert symbol, indicates a situation that
could result in equipment damage Follow safety messages
to avoid or reduce the risk of injury or death
[ AwAR-I-G
The engine exhaust from this product contains
I chemicals known to the State of California to cause
lcancer, birth defects, or other reproductive harm.
Hazard Symbols and Meanings
Electrocution Electrical Shock Electrical Shock
Toxic Fumes Explosion
(
Explosive Pressure
Chemical Burn
Hot Surface Kickback
2
Fire