Descargar Imprimir esta página

Briggs & Stratton SNAPPER G1000 Manual Del Propietário página 5

Ocultar thumbs Ver también para SNAPPER G1000:

Publicidad

Idiomas disponibles

Idiomas disponibles

SlI lPPfR
TM
bye&
Sfratf@n'
_
_WER PRODUCTS
KNOW
YOUR
GENERATOR
Read
this
owner's
manual
and
safety
rules
before
operating
your
generator.
Compare
the illustrations
with
your
generator
to familiarize
yourself
with
the locations
of various
controls
and
adjustments.
Save this manual
for future
reference.
Spark Plug (inside
cover)
Choke Lever
Fuel Shut-Off Valve
Fuel Tank
Engine ON/OFF
Switch
12 Volt DC, 8.3 Amp
Accessory Jack
Circuit Breaker (AC)
120 Volt AC, 7.5 Amp
Receptacle
Recoil
Starter
Grounding
Lug
12 Volt
DC, 8.3 Amp
Accessory
Jack --
May be used
to power
12 Volt DC electrical
devices or recharge
12 Volt
DC batteries.
120 Volt AC, 7.5 Amp
Receptacles
--
May be used to
supply electrical
power
for the operation
of 120 Volt AC,
single phase, 60 Hz electrical
lighting, appliance,
tool and
motor
loads.
Air Cleaner
--
Protects engine by filtering dust and debris
out of intake air.
Choice
Lever-
Used to manually provide
proper
starting
mixture
when engine is cold.
Circuit
Breaker
(AC) --
Receptacles
are provided
with a
push-to-reset
circuit breaker
to protect
the generator
against electrical
overload.
Oil Fill/Drain
(inside cover)
Engine
ON/OFF
Switch --
Used to stop a running
engine.
Fuel Shut=Off
Valve --
Use this valve to turn the fuel
supply on and off.
Fuel Tank
-- Capacity
of
.2 U.S. gallons (4.5 liters) of
fuel.
Grounding
Lug -- Use this connection
to properly
ground
the generator.
See "System Ground"
on page 7.
Oil Fill/Drain
-- Access to oil fill dipstick and engine oil
drain plug.
Recoil
Starter
--
Used for starting the engine.
Spark
Plug -- Access to engine spark plug.
5

Publicidad

loading