Briggs & Stratton SNAPPER G1000 Manual Del Propietário página 6

S_4PPER
TM
bye& Sfrafton °
_ POW_R P_OpU_s
ASSEMBLY
Your generator requires some assembly and is ready for
use after it has been properly serviced with the
recommended oil and fuel.
If you have any problems with the assembly of your
generator, please call the generator helpline at
1-800-317-7833. If calling for assistance, please have the
model, revision, and serial number from the data tag available.
Remove Generator From Carton
1. Setthe cartonon a rigid f lat surface with "ThisSide
Up" arrows pointing upward.
2. Carefully open the top flaps of the shipping carton.
3. Cut down corners at one end of carton from top to
bottom and lay that side of carton down flat.
4. Remove all packing material, carton fillers, etc.
5. Remove the generator from the shipping carton.
Carton Contents
Check all contents. If any parts are missing or damaged, call
the generator
helpline at 1=800=3 17-7833.
Shipped with
your generator is:
• Plain unit
• Owners manual
• Engine manual
• Battery charge cables
• Oil bottle
BEFORE STARTING ENGINE
Add Engine Oil and Fuel
• Place generator on a level surface.
CAUTION
" Refer to engine manual for oil and fuel fill information.
. Damage to equipment resulting from failure to follow this
instruction will void warranty.
• Refer to engine owner's manual and follow oil and fuel
recommendations and instructions.
NOTE: Check oil often during engine break-in. Refer to
engine owner's manual for recommendations.
NOTE: The generator assembly rotates on a prelubricated
and sealed ball bearing that requires no additional
lubrication for the life of the bearing.
6