Andis CCA Instrucciones De Uso Y Cuidado página 6

You can keep the clipper placed on the charging mat when not in use. The charging
mat will maintain the battery at full charge. We recommend that the charging mat be
unplugged if the clipper won't be used for seven or more days.
If the battery pack and/or clipper is knocked out of alignment on the charging mat,
remove from the charging mat and place back onto the charging mat in the correct
target zone.
REPLACING THE BATTERY PACK
To remove the battery pack from the clipper, press the indented tab above the
battery on the back of the clipper and slide off. To replace the battery pack, slide the
battery into the clipper.
FAILURE TO CHARGE
1. Make sure voltage is present at the wall outlet (confirm with an appliance you
know is working).
2. Make sure the clipper is OFF.
3. Check to make sure charging mat cord is plugged firmly into adapter. Twist the
charging mat cord slightly to ensure good electrical connection.
4. If failure to charge still exists, return clipper to Andis or an Andis authorized service
station for examination and repair or replacement.
A
D
CLIPPER
INDICATOR
LIGHTS
6
B
E
OIL
C
F