LawnMaster CLGT2410T Manual Del Operador página 20

OPERATION
PIVOTING HEAD
1. To pivot the head, push the pivot button and adjust the shaft to any of the 5 positions (Fig. 11).
2. Adjust the angle of the trimmer head according to the intended operation.
3. Release the button, make sure the shaft locks into place.
0°
Pivot Button
EDGING
The lower shaft can be twisted when edging. Adjust the angle of the trimmer head according to the
intended operation.
1. Adjust the trimmer head position to ensure that the shaft is parallel with the debris guard as shown
(Fig. 12).
2. Firmly grasp the trimmer head and lower shaft assembly. Push the trimmer head away from the
lower shaft to disengage it from the lock position. Rotate the lower shaft 90° in clockwise direction
for edging (Fig. 13).
Fig. 10
2
1
90°
Fig. 11
20