LawnMaster CLGT2410T Manual Del Operador página 24

OPERATION
8. Keep the trimmer head at an angle of about 30° to the ground when trimming. Avoid pressing it
against the ground as this can ruin the lawn and damage the product (Fig. 18).
Fig. 18
NOTE: Let the cutting device do the work. Let it work at its own pace, never force it into the
area to be cut.
9. Carefully manoeuvre the tool around objects, such as trees and bushes, ensuring it does not come
contact with fragile plants (Fig. 19).
10. Adjust the trimmer head angle when trimming on edges and near walls.
walls and curbs (Fig. 20).
Fig. 19 Fig. 20
AFTER USE
1. Switch the product off, remove the battery pack and let it cool down.
2. Check, clean and store the product as described below.
24