Descargar Imprimir esta página

LawnMaster CLGT2410T Manual Del Operador página 22

Podadora inalámbrica de 10 24v max de ión-litio

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
hit by the cutting device.
Outer Position
GENERAL OPERATION
1. Check the product, its battery pack, and charger as well as accessories for damage before each
use. Do not use the product if it is damaged or shows wear.
you keep your balance with your feet apart.
4. Ensure that the air vents are always unobstructed and clear. Clean them if necessary with a soft
brush. Blocked air vents may lead to overheating and damage the product.
5. Switch the product off immediately if someone enters the work area. Always let the product come to
a complete stop before putting it down.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate on the work and have
full control over the product.
TRIMMING
WARNING
Ensure the protective tape on the trimming line cut-off blade is removed before use and the debris
1. Do not cut wet grass because it tends to stick to the trimmer head and guard, preventing proper
discharge of grass clippings, and could cause you to slip and fall.
2. Wait until the product has come to a standstill before placing it down.
3. Regularly remove clippings and dirt around the trimmer head with the battery removed from the
product.
Inner Position
22
Fig. 14

Publicidad

loading