Publicidad
Idiomas disponibles
Idiomas disponibles
1
1.
Open the battery door.
2.
Align the ribs on the battery with the grooves in
the battery compartment.
3.
Push the battery into the battery compartment
until the battery locks into place.
4.
When you hear a click, the battery is installed.
5.
Close the battery door.
Note: The motor will start only after inserting the
safety key.
3.9
START THE PRODUCT
1.
Press and hold the power button. Then, grasp
either of the blade activation levers towards the
handle bar to engage the blades.
Note: Complete the two consecutive actions within
5 seconds.
2
2
1
TURBO
English
2.
Once the product has started, you can release
the power button.
3.10
ACTIVATE TURBO BOOST (TEMPORARILY
INCREASED CUTTING SPEED)
1.
Press the turbo button to increase the speed up
to XX RPM.
2.
Release the turbo button to operate at the default
cutting speed.
Note: When using the turbo boost button,
the battery will drain faster. Therefore, it is
recommended to use the turbo boost button only
when necessary.
3.11
LED HEADLIGHTS
1.
The LED headlights will turn on when the device
is switched on and will switch off when the device
is switched off.
3.12
STOP THE PRODUCT
1.
Release the blade activation lever(s) to stop the
product.
2.
Open the battery door.
3.
Remove the safety key.
4.
Press the battery release button to remove the
battery.
11
TURBO
TURBO
EN
Publicidad
