Publicidad
Idiomas disponibles
Idiomas disponibles
EN
5.
Carefully rotate the blade(s) manually to ensure smooth spinning.
6.
Start the product and test the blade(s) to verify proper installation. Incorrect installation can result in vibrations
or unsatisfactory cutting performance.
5
TRANSPORTATION, STORAGE, AND
DISPOSAL
5.1
SET THE PRODUCT IN TRANSPORTATION
POSITION
1.
Remove the grass catcher.
2.
Remove the battery.
3.
Pull the handlebar latch to fold the handles.
1
4.
Lock the handles into position.
5.
Position the mower in a vertical position and
make sure that the brackets touch the floor.
English
2
5.2
• Any removable (electronic) parts, such as the
• Avoid transporting the product in bad weather
• Make sure to adequately cover any exposed
• Use tape on open contacts of the battery and
• High speeds, along with wind, and rain may force
• In case of malfunction occurring after transport in
5.3
Symbols on the product or the package of the product
mean that the product is not domestic waste. Recycle
it at a recycling station for electrical and electronic
equipment. This helps to prevent damage to the
environment and persons.
16
TRANSPORTATION
charger and battery, should always be disconnected
before transport.
conditions when possible.
electronic parts if transportation in adverse weather
conditions is unavoidable.
ensure it is securely stowed to prevent movement.
moisture into the electronic components, which
can lead to temporary malfunctions or permanent
defects.
such conditions, remove the battery and allow all
parts to air-dry when you reach your destination.
DISPOSAL OF THE BATTERY, BATTERY
CHARGER, AND PRODUCT
Publicidad
