Slat
Equipment Access Panel Door
Electrical Recess & Drain Hose
(Cut-Outs may also be located under door)
To access the equipment compartment (if your spa has vertical slats):
•
Remove 1 vertical slat and 3 screws on each side of equipment access panel door.
•
Remove screws from equipment access panel door then remove door.
•
Remove screws from foam or plastic door to access equipment compartment.
To access the equipment compartment (if your spa does not have slats):
•
Remove 4 screws, one on each corner of door panel.
Equipment Access Panel Door
Electrical
Recess
To access the equipment compartment (if your spa has horizontal slats):
•
Remove screws from equipment access panel door then remove door.
•
Remove screws from foam or plastic door to access equipment compartment.
EQUIPMENT ACCESS
EQUIPMENT ACCESS PANEL
Topside Control Panel
Drain
Hose
Slat
Screw
7
Foam or Plastic
Door
Foam or Plastic
Door