Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-1237-001.book Page 14 Tuesday, July 27, 2010 4:18 PM
14 | English
Apply the power tool to the screw only
when it is switched off. Rotating tool inserts
can slip off.
Adjust the gear switch only when the ma-
chine is at a complete stop.
Always push the gear selector and turn the
operating mode selector switch through to
the stop. Otherwise, the machine can be-
come damaged.
Symbols
The following symbols are important for reading and understanding the operating instructions.
Please take note of the symbols and their meaning. The correct interpretation of the symbols will
help you to use the machine in a better and safer manner.
Symbol
Meaning
GSR 14,4 VE-2-LI/
GSR 18 VE-2-LI/
GSB 14,4 VE-2-LI/
GSB 18 VE-2-LI:
Cordless screwdriver/
Combination cordless drill
Grey-marked area: Handle
(insulated gripping surface)
Read all safety warnings and all
instructions
Movement direction
Drilling and screwdriving
Low speed
Switching On
Right/left rotation
Battery Capacity
U
Rated voltage
n
1
No-load speed (1. gear)
0
M
Maximum torque according to
ISO 5393
2 609 140 752 | (27.7.10)
In case of excessive loading, e. g., pro-
longed blocking of the application tool, the
electronics switch off the power tool. After
switching on again, the power tool can be
used again as intended for. In case of con-
tinued overload, the power tool will switch
off again in order to prevent damage to the
motor.
Symbol
Meaning
Article number
Before any work on the machine
itself, remove the battery
Reaction direction
Impact drilling
High speed
Switching Off
Prohibited action
n
Impact rate
S
n
2
No-load speed (2. gear)
0
Brickwork
Bosch Power Tools
Publicidad
