Sears Kenmore Elite 790.4715 Manual Del Usuario página 34

Genera Care & CReaning
C_eaning the Burner Grates, Burner Caps, Burner Heads and Wok Stand
Surface
Burner
Grate
Surface
The Burner Grates, Burner Caps, Burner Heads and Wok Stand shouUd be
routineUycUeaned, Keeping the burner ports dean wHU prevent improper ignition
and an uneven flame at each burner position, Refer to the following instructions:
To Remove and Replace the Surface Burner Grate, Surface Burner Cap and
Surface Burner Head - Remove in the following order; (1 st) Surface Burner
Grate, (2nd) Surface Burner Cap, (3rd) Surface Burner Head (See Figure 1),
Reverse the procedure above to repUacethe Surface Burner Cap, Surface Burner
Head and Surface Burner G rate, Do not remove any burner parts from the
cooktop untit the burner parts have compJetely cooled and are safe to
handle. Do not operate the surface burners without the Surface Burner Caps,
Surface Burner Heads and Surface Burner Grates properly in place.
Orifice
hoEder
Figure 1
Surface Burner
Grate
To Clean the Burner Caps, Burner Heads, Grates and Wok Stand - Use a
soap-filled scouring pad or a mild abrasive cleanser to clean the surface burner
caps and surface burner heads, The Grates and Wok Stand are designed to be
Dishwasher safe for cleaning, The ports (or slots) around the burner heads must
be routinely cleaned, If residue still remains in these ports, use a smaIFgauge
wire or needle to clean the slots or holes, For proper flow of gas and ignition of
the burner--DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY
OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING.
ALWAYS keep the surface burner cap and surface burner head in place whenever
a surface burner is in use,
Surface Burner Surface Burner Wok Stand
Caps Heads
THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop,
Use caution when replacing the burner cap so the electrode is not damaged, This may cause a delayed
ignition or prevent the burner from igniting,
Any additions, changes or conversions required in order for this appliance to perform satisfactorily must
be made by Sears Service, Call 1-800-4-MY-HOME® (See back cover),
34