Dräger FS-5000 Manual Tecnico página 6

en |
Description
2 Description
2.1 Product overview
A
FS-5000 Flame Simulator
Rear cover
Carrying
strap bracket
Main body
The components and features of the Dräger FS-5000 Flame Simulator are:
● The product is supplied with a transit case, a battery charger, and a carrying
strap.
● The simulator is portable and can be carried and used by a single operator.
● The simulator is battery powered, with the batteries and electrical/electronic
components housed in the enclosure which comprises the main body and
the front and rear covers.
● The batteries are rechargeable using the charger supplied with the product.
The enclosure rear cover is removable for battery charging.The charger is
supplied with plug adaptors to enable use in various regions.
● The product label shows the CE conformity and explosion protection
marking, the operating temperature range, the disposal symbol, and other
essential safety information. For further information see: "How to dispose of
the instrument", page 8.
6
2.2
The Dräger FS-5000 Flame Simulator is intended to test the operation of
Dräger Flame 3000 and Dräger Flame 5000 detectors within a range of 3 m to
8 m (10 ft to 26 ft). It is suitable for use in extreme environments, including
potentially explosive atmospheres and offshore applications.
2.3
For further information on approvals see declaration of conformity at the end of
Operating button
this document or www.draeger.com/product-certificates.
2.4
Front cover
LED window
The flame simulator is fitted with a label that shows the certification and
conditions within which it can operate.
The following label is an example only.
3
3.1
NOTICE
Inhibit any control equipment associated with the detector during testing to
prevent unwanted alarms.
1. Carry out a visual check of the simulator before use to ensure that it is clean
and undamaged.
● Clean if required. For further information see: "Cleaning", page 7.
● If the simulator is visibly damaged or faulty, do not use it and contact
2. Position the simulator within range: 3 m to 8 m (10 ft to 26 ft), and point the
LEDs toward the detector.
Intended use
Approvals
Explanation of type-identifying marking and
symbols
Use
Testing the detector
Dräger for repair.
Technical manual |
Dräger FS-5000