Descargar Imprimir esta página

Shark RS-JET CARBON Manual página 28

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

INTERIOR CLEANING
The internal textile parts are was-
hable. In order not to damage them
it is important to carefully follow the
advice below: The cheek pads and
liner should be washed by hand in
lukewarm, soapy water (approxima-
tely 30°C). Do not use aggressive
detergent products. Use either a small
amount of detergent for delicate tex-
tiles or Marseille soap.
It is essential to dry the textiles and
foams completely before use. They
must be dried at room temperature.
Never iron the textile components.
For leather-look or textile parts
attached to safety elements, use a
slightly damp sponge or cloth with a
little Marseille soap, then rinse with
plain water.
Avoid using too much water on
polystyrene components.
It is essential to ensure that all interior
parts are perfectly dry before using
the helmet.
WARNING! Damaging the
interior foams compromises
the correct size of your helmet. If it
no longer fits your head, the helmet
may come off, leaving your head
unprotected and causing serious,
even fatal injury.
TEXTILES
The comfort textiles and pads of the
RS-JET Carbon will allow you to better
appreciate the performance of your
helmet. The parts in contact with your
skin are made of a fabric that ensures
comfortable contact, good perspira-
tion absorption and good resistance to
aging. The surfaces are treated to limit
the risks of mould and bacteria.
WARNING! although selected
for their qualities of strength
and durability over time, all parts
of the interior covering are subject
to normal wear depending on care
and maintenance, duration of use as
well as the acidity of your sweat. If
you notice aging, we advise you to
replace your interior fittings in order
to maintain a perfectly clean helmet
over time and provide you with the
necessary comfort.
will be able to offer you replacement
parts, and also optionally offer you
cheek pads of different thicknesses
and densities in the event that the
standard choice does not suit your
face shape.
WARNING! Every time you
put on your helmet, check that
it fits your head.
Your retailer
9

Publicidad

loading